COREMO COMBINED A-DUAL PNEUMATISK BROMS
Art.nr: A-DUAL
The braking forces of the two standard models, A1-2N and A3-3N, are 4820 [N] and 12490 [N] for air-actuated and 5500 [N] and 10970 [N] for failsafe operation, respectively. To release the brake, an air pressure of no more than 6 [bar] is required. The brake can be installed in any position since it has a lever balancing and lining pad alignment system. The SG iron caliper is designed to withstand the mechanical and thermal stresses generated in compliance with satisfactory safety coefficients.
The lining pads can be adjusted to ensure that the friction surfaces grip the brake disc at all points.
| Braking force F | A3-3N: air actuated 12490 N at 6 bar, spring applied 10970 N. A1-2N: air actuated 4820 N at 6 bar, spring applied 5500 N |
|---|---|
| Dynamic torque | = F • (disc radius in m - 0.03) = Nm |
| Max total wear | 16 mm |
| Thickness of new lining | 16 mm |
| Continuous thermal capacity Qc | 1.7 kW |
| Continuous thermal capacity for double pad version Qc | 2.7 kW |
| Minimum release pressure | 5 bar (spring applied) |
| The torque values specified are obtained with | n. 8 springs (spring applied) |
| Torque proportionally less are achievable with | n. 6-4-2 springs |
Download - Pneumatic Caliper Brakes Brochure.pdf
För reservdelar, kontrollera serienumret på din broms och skicka det till [email protected]. Med serienumret kan vi identifiera alla reservdelar du behöver.
Vi erbjuder Coremo original bromsbelägg, för mer information, kontakta oss på [email protected].
